Showing posts with label coronado cabbie. Show all posts
Showing posts with label coronado cabbie. Show all posts

Tuesday, March 27, 2012

Setting Your Shutter Speed at Sunset


Sunset Cliffs
San Diego, CA United States


Canon 5D Mark II
Focal Legnth 75
Aperture 22
Shutter 2.5 sec.
ISO 50

For this shot I used a relatively slow shutter of 2.5 seconds to record the waves as they washed over the rocks, it created a pleasant flowing effect. This can be achieved with a shutter of a 1/2 second or more, but it yields more of a streaming effect with shutters in excess of a few seconds.

You may see many photographers doing this with subjects such as waterfalls.  A problem is presented with that however.

The lighting during the daytime is much higher which restricts some of the functionally of the camera.  Even with using all of your manual adjustment of the ISO and Aperture you are still unlikely to be able to set the shutter to a low enough speed by stepping down to the cameras limits in regards to the amount of light it lets in.

The first thing you would want to do is to bring the ISO the the lowest possible level.  For the 5D Mark II the lowest level is ISO 50, while many other Canons may have an ISO of 100, or even 200.  This will give you smoother pictures anyways, and I would recommend always setting your camera to the lowest number possible while not sacrificing depth of field (Aperture) or shutter.

Then if bring the aperture to the highest possible number (which results in the smallest possible opening to let light in).  With certain lenses you may be able to get down to F32.  Sometimes you still may be unable to achieve light levels low enough to justify such a slow shutter.  Often times it is difficult to get shots of anything slower than 1/2 second.

This is where the neutral density filter comes in.  All this filter does is limit the amount of light that comes in.  It's only purpose is to limit the amount of light that can enter through the lens, typically it is one F stop.  If the picture still isn't dark enough you can add multiple filters, or perhaps something with much heavier dampening such as a 10 stop filter.

Saturday, March 24, 2012

Correcting Exposure in Aperture 2.0


Orange Avenue
Coronado, CA, United States

Canon 5D Mark II
Focal Legnth 47
Aperture 18
Shutter 20 sec.
ISO 400

A picture of my cab.  For this photo it was impossible to get the scene evenly exposed so some post production was needed to be done.  For my post production (which is typically minimal) I use Aperture 2.0, which is much more user friendly, but a little less comprehensive than Adobe Photoshop (whatever version).

In this case i found that it was best to meter the scene for the road and the street lights/lighting and use the shadows function of Aperture to evenly expose the side of the cab.  Care is needed when doing this as noise/grain is added when the Shadows function is used.  Aperture uses an algorithm to determine the darkest parts of the scene and isolates them, letting you manually adjust the brightness in certain sections of the picture.

Conversely there is a highlights function that isolates the brightest parts of the scene and allows the user to manually dim/darken those spots.  The downside of this is that if used in excess halation (a halo effect around the edges, which is more noticeable in highly contrasted subjects) often occurs.  Also, when used excessively there is a dulling/flattening effect on colors in the section of the scent that is being altered, resulting in an artificial look.  Both these adjustments are best used sparingly.